The SoundCore Life Dot 2 is a Bluetooth speaker that delivers superior quality sound. The speaker can be reset if it is not responding correctly or you want to change the Wi-Fi connection. Here’s how to reset the SoundCore Life Dot 2.
Step 1: Disconnect the Speaker from Power
The first step is to disconnect the speaker from the power source and any connected device. To do this, simply unplug the power cable from the rear of the speaker. If the speaker is connected to another device, such as a smartphone, laptop, or tablet, make sure to disconnect the device as well.
Step 2: Hold Down the Power Button
After the speaker is disconnected from the power and any connected device, hold down the power button for 10 seconds. The speaker should then turn off and you are now ready to reset the speaker to its factory settings.
Step 3: Press and Hold the Power Button
Press and hold the power button for 3 seconds, then let go. The speaker then should turn on and indicate it is in reset mode. Once the speaker is in reset mode, let it stay turned on until the reset is complete.
Step 4: Wait for the Reset to Complete
The reset process should take about 10 minutes to complete. After the reset is complete, the speaker will return to its factory settings.
Step 5: Turn The Speaker Off and Reconnect the Power Cable
Once the reset is complete, turn off the speaker and reconnect the power cable. Now your SoundCore Life Dot 2 should be reset to its factory settings and ready for use.
Resetting your SoundCore Life Dot 2 is simple and easy to do. By following the steps outlined here, you can quickly reset the speaker and have it ready for use in no time.